Diamond Flange BMR-200, High Speed High Torque High Accuracy Hydraulic Motor

  

Package Included 1 Hydraulic Motor. BMR 200 Replace Hydraulic Motor Orbital Shaft 25mm. This hydraulic motor is not only made of sturdy and durable materials but also has high speed and torque. The stator rotor and bearings have high precision and strong pressure.

It can be widely applied in industries, agriculture, and other fields, providing you with strong power. It is made of cast iron and rubber, and adopts a painting process, making the whole product. Sturdy, and stable, and can maintain its practicality for a long time. Equipped with three tiers of rubber sealing rings, it greatly enhances its sealing performance and can effectively prevent oil leakage, making your user experience better.

The oil pan, stator, rotor pair, and output shaft inside ensure the high precision of the product and make your use more accurate and. The bearing has a strong radial force and high-pressure.

Which can effectively extend the service life of the product. High speed (continuous: 284rpm; discontinuous: 339rpm) and high torque (continuous: 285N M; discontinuous: 319N M) bring you stronger power, thus improving your efficiency. As an executive component of the hydraulic system, the motor can effectively convert the liquid pressure energy provided by the hydraulic pump into the mechanical energy (torque and speed) of its output shaft, thus providing sufficient energy. The simple structure, small body, and smooth surface allow you easily clean the dust with a soft towel and water. Can better protect your product during transportation and make it delivered to you completely to the greatest extent.

Compared with traditional square corners, an arc de. Sign can better ensure safety. The base with multiple support legs can effectively maintain stability during the process. It is mainly used in the rotating mechanisms of various machinery such as agriculture, fisheries, light industry, lifting and transportation, mining, and engineering machinery.

Net Weight: 7.9kg/17.42lbs. Gross Weight: 8.5kg/18.743lbs. Package Size: 261310cm/10.245.123.94inch. Max Speed: 284/339 RPM(Continuous/Discontinuous).

Pressure Drop: 110/124 Bar (Continuous/Discontinuous). We recommend that the normal operating oil temperature is 2060?

, and the maximum system operating temperature is 90? (not more than one hour).

The kinematic viscosity of the oil at 40°C/104? The hydraulic oil can be selected according to the actual working and ambient temperature. We recommend that the filter precision be 10-30 microns.

It is better to add a magnetic block at the bottom of the oil tank to prevent metal chips from entering the system. The solid pollution level of working oil shall not be higher than 19/16. The motor can be used in series or parallel.

When the back pressure exceeds 10MPA (the rotating speed is lower than 200RPM), the external drain port must be used for pressure relief. It is better to connect the external drain port directly to the oil tank. In order to make the motor have a long service life, the best working condition of the motor should be 1/3-2/3 of the rated working condition.

When loading the motor, it should be operated at 30% of the rated pressure for about 1 hour. In any case, before loading the motor, ensure that the motor is filled with oil.

It is strongly recommended to run the motor at 30% load for about 1 hour before running at full load to allow the motor to be fully run-in. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount.

Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.