High Accuracy: The combination of the oil distribution plate, stator and rotor pairs, and output shaft ensures the high accuracy of the product and provides more convenience for your use. Good Sealing Performance: The rubber sealing ring can effectively prevent oil leakage, not only ensuring a smooth use process but also saving you cost. Careful Design: The high-quality bearings make the product have a strong radial force and high-pressure. So you can use it safely.
Powerful Function: As an executive component of the hydraulic system, the motor can effectively convert the liquid pressure energy provided by the hydraulic pump into the mechanical energy (torque and speed) of its output shaft, thus providing sufficient energy. Simple Installation and Use: Simple structure and quick start design ensure that you can complete the installation and start using it in a short time. The motor can be used in series or in parallel, with high-cost performance. Ideal Gift: With good performance, this product can be used as a gift for family, friends, and lovers to make their work easier.Cleaning: The smooth surface and simple structure allow you to easily remove dust and residues with a towel and water. Round Corners: Compared with traditional square corners, an arc design can better care for your skin.
Base: The base with four support legs can effectively maintain stability during the process. This item has a wide range of applications, such as industrial, logistics, agricultural, refitting, and other scenarios. 750 1430 2110 2770 3460 4170 4890 5610 6310 7010 7700. 85 160 240 315 390 470 550 635 715 790 870. 9 9 8 8 8 7 7 7 5 4 2.800 1500 2290 3030 3850 4620 5310 6000 6750 7490 8240 8990 9730 10470. 90 170 260 340 435 520 600 680 765 845 930 1015 1100 1185. 18 18 17 16 16 15 15 14 13 13 12 11 10 8. 860 1630 2470 3310 4120 4900 5640 6390 7190 7890 8780. 95 185 280 375 465 555 635 720 810 890 990.
38 38 37 36 36 35 35 34 34 33 32. 860 1690 2540 3410 4180 4980 5780 6580 7400 8220. 95 190 285 385 470 565 655 745 835 930. 57 57 56 55 54 53 52 50 49 47. 840 1680 2550 3400 4260 5090 5870 6650 7480. 95 190 290 385 480 575 665 750 845.76 76 75 74 73 72 70 68 66. 800 1680 2550 3400 4260 5100 5920 6730 7560. 90 190 290 385 480 575 670 760 855. 95 95 94 93 92 91 89 86 84. 760 1660 2520 3380 4270 5110 5900 6690.
85 190 285 380 480 575 665 755. 114 114 113 112 111 110 108 105. 740 1640 2490 3370 4260 5100 5880 6650. 85 185 280 380 480 575 665 750.133 133 132 131 130 129 127 124. 710 1620 2460 3350 4240 5080 5840.
80 185 280 380 480 575 660. 153 153 152 151 149 147 145.
680 1600 2430 3340 4220 5060 5810. 75 180 275 375 475 570 655.172 172 171 170 168 166 164. 610 1580 2400 3320 4210 5040 5780.
70 180 270 375 475 570 656. 192 191 190 189 187 185 183. 570 1490 2340 3220 4160 5010 5740. 65 170 265 365 470 565 650.
211 210 209 208 206 204 201. 490 1350 2250 3080 4070 4960 5700.
55 155 255 350 460 560 645. 239 238 237 236 235 233 230. 1080 1650 2270 3020 3850. 120 185 255 340 435.
285 284 282 281 279. Surface Treatment: Painting and Quenching.
Port Size: 1 1/16-12inch 0-ring Staggered. Net Weight: 19.3kg/42.55lbs. Package Size: 372018cm/14.577.877.09inch. Overall Size: 12.913.631.9cm/5.15.412.6inch.
We recommend that the normal operating oil temperature is 2060? , and the maximum system operating temperature is 90? (not more than one hour). The kinematic viscosity of the oil at 40°C/104? The hydraulic oil can be selected according to the actual working and ambient temperature. We recommend that the filter precision be 10-30 microns. It is better to add a magnetic block at the bottom of the oil tank to prevent metal chips from entering the system. The solid pollution level of working oil shall not be higher than 19/16.The motor can be used in series or parallel. When the back pressure exceeds 10MPA (the rotating speed is lower than 200RPM), the external drain port must be used for pressure relief. It is better to connect the external drain port directly to the oil tank. In order to make the motor have a long service life, the best working condition of the motor should be 1/3-2/3 of the rated working condition.
When loading the motor, it should be operated at 30% of the rated pressure for about 1 hour. In any case, before loading the motor, ensure that the motor is filled with oil. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us.
It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount.
Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.